Search


Home

Our Technologies
RF Admittance Level Measurement Products
Clearline, In-Line Fluid Detector
The ClearLine product is a point level switch that mounts directly into the process piping between two flat-faced flanges. This product is best suited to pump protection and low-level indication below vessels.

Dumpstar
506-6900 Series using 406-6000 Electronics for Water Dump on Oil/Water Separators Our compact, heavy-duty controls provide reliable indication of crude oil/water interface levels in oil production separators. Dependable performance has been proven in automatic well testers, free-water knockouts, and electrostatic treaters.

Floating Roof Tanks - Spill Prevention
Specifically designed for Floating Roof Tanks (Internal and External roofs) with Flexible Sensing Element 700-0005-594 Field Adjustable lengths from 1' to 18' (0.3 to 5.48 m) 12" to 216" (305mm to 5486 mm) Wetted Parts: 316SS 3/4" NPT Mounting, 3/16" FEP insulated flexible and adjustable cable, Non-Sparking Brass Sensor.

IntelliPoint RF (Line Powered)
The IntelliPoint Line Powered provides a switch with relay output and “On-Board” self-diagnostics to ensure reliability and sensing elements for a wide variety of temperatures, pressures, and materials. The IntelliPoint carries hazardous area approvals to provide a solution to critical point level applications.

IntelliPoint RF (Two-Wire)
The IntelliPoint Loop Powered Two Wire provides a switch with current output and “On-Board” self-diagnostics to ensure reliability and sensing elements for a wide variety of temperatures, pressures, and materials. The IntelliPoint carries hazardous area approvals to provide a solution to critical point level applications.

Multipoint II
The Multipoint II product offers three control points located anywhere along a single vertically inserted sensing element. One control point can be set up for differential measurement for pump control. This product is best suited to sump level and batch processing control.

Plugged Chute Detector
Plugged Chute Detector using PML series Electronics Drexelbrook’s Flush-Mounted Sensors reliably detect presence or absence of material flowing through chutes. If process material stops flowing due to a plugged condition, the system will alarm, allowing further action to occur (alerting an operator, shutting down a conveyor belt, etc.). This permits the operator to prevent a problem before it happens.

Safety IntelliPoint (Two Wire)
The SIL IntelliPoint Loop Powered Two Wire provides a switch with current output and “On-Board” self-diagnostics to ensure reliability and conforms to SIL 2 specifications providing the ultimate in switch integrity and sensing elements for a wide variety of temperatures, pressures, and materials. The IntelliPoint carries hazardous area approvals to provide a solution to critical point level applications.

ThePoint (Line Powered)
ThePoint Line Powered provides a relay output switch and has hazardous area approvals making it a good choice for most of your point level application requirements. ThePoint sensing element offering is suitable for most temperature, pressure, and material types.

ThePoint (Two Wire)
ThePoint Loop Powered Two Wire provides a Current output switch and has hazardous area approvals making it a good choice for most of your point level application requirements. ThePoint sensing element offering is suitable for most temperature, pressure, and material types.

Z-Tron III
The Z-tron III is a general-purpose level switch with relay output suitable for applications that do not require hazardous area approvals and for moderate temperature and pressure.

Z-tron IV
Z-tron IV™ Point Level Switch, a reliable low-cost, on/off level switch
The low-cost, Drexelbrook Z-tron IV level switch is unaffected by sticky coatings and impervious to corrosive liquids. The all-electronic design means no moving parts to wear, break or fail. Based on field-proven RF technology, the Z-tron IV is a simple and reliable on/off level switch.

about us - our productsliteratureservicecareerscontact usapplications - news
©Copyright 2012 AMETEK, Inc. All Rights Reserved
privacy policy - trademarkssitemap