|
Heater-Treater, Free Water Knock Out,
Test Separator, Wash Tank
Monitor Oil Dryness,
Control Interface Setpoint
• Cut Monitor
Control Water Dump Valve
• Universal (Interface)
Emulsion Thickness Control
• Cut Monitor
Control Shipping Valve
• Universal (Insulating)
• ThePoint
Low Total Level Alarm
• ThePoint
Automatic Well Tester
Control Total Level
• Universal (Insulating)
• ThePoint
Control Interface
• Universal (Interface)
• Intellipoint
• Magnetostrictive
Measure Water, BS&W, % in Oil Phase
• Cut Monitor
Pipeline
Slug Detection
• Cut Monitor
|
LACT Unit
Monitor % Water, BS&W, in Oil Sold
• Cut Monitor
Floatation Separator, Wemco
Control Liquid Level
• Universal (Conducting)
Storage Tanks
Prevent Overfill
• Point-Level with Verify*
Measure Water Under Organic Commodity
• Universal (Interface)
• Magnetostrictive
Automatic Water Draw-Off
• ThePoint or
• Universal (Interface)
Measure Inventory Level
• Radar
• Magnetostrictive
Drilling Mud level Control
• ThePoint
• Sonic
Pump Protection
• Clearline
|
|
• Universal = Any Type of Universal or Universal Lite Electronics with Suitable Probe
• Point-Level = Any Type of RF or Gap Electronics with Suitable Sensor
• ThePoint = ThePoint Electronics with Suitable Probe (or Intellipoint, if desired)
• Intellipoint = Intellipoint Electronics with Suitable Probe
• Sonic = USonic, USonic-R
• Radar = DR7000 Series with DN40, DN50, DN80 Horns
• TDR = DR7100 Series
• Cut Monitor = CM6 Electronics with Permaseal Probe
• Magnetostrictive = DM330 or DM231 with ModBus
• Clear Line = Clear Line Fluid Detector
• Plugged Chute = Plugged Chute Detection- Point Level
* Any time an instrument failure, or loss of power could cause a safety problem or product loss, a single point backup with Verify is REQUIRED!
|
