The Problem
· The density of Fly Ash changes based on the location source of the Coal, resulting in inaccurate level measurement.
· Stratification of Fly Ash layers within the Silo make “total level” measurements difficult for many traditional continuous level technologies.
· Maintenance personnel continue to make manual level readings and adjustments to existing level systems.
The Solution
·
DR7100 TDR Level system for accurate Total Level measurement of FlyAsh. Measurement Ranges possible to 100 ft., or greater.
· Unaffected by ash coating deposits, density variations and requires no periodic maintenance – no calibration. High Accuracy to within 1” of actual level on the sensing element.
Download this application note as a PDF