Videos - Tutorials

  • Configure Impulse TDR Transmitter using HARTWin
    Configure Impulse TDR Transmitter using HARTWin

    How To Configure Drexelbrook Impulse TDR Transmitter using HRTWin

    How To Configure Drexelbrook Impulse TDR Transmitter using HRTWin

    View More
  • Perform Short Circuit Check on Cables
    Perform Short Circuit Check on Cables

    Learn how to perform short circuit check on general purpose and probe cables

    Learn how to perform short circuit check on general purpose and probe cables

    View More
  • Recording Signal Waves Using HRTWin
    Recording Signal Waves Using HRTWin

    Learn how to record signal waves on HRTWin, save the signals and review them

    Learn how to record signal waves on HRTWin, save the signals and review them

    View More
  • Record Waveforms on PACTWare
    Record Waveforms on PACTWare

    Learn how to record Waveforms on PACTWare, save the waves to be mailed to a service technician

    Learn how to record Waveforms on PACTWare, save the waves to be mailed to a service technician

    View More
  • USe STExplorer With Iniversal IV
    USe STExplorer With Iniversal IV

    Learn how to use the basic UI of STExplorer with Universal IV

    Learn how to use the basic UI of STExplorer with Universal IV

    View More
  • Configuring using PACTware
    Configuring using PACTware

    Tutorial on how to perform configuration and commission of field device using PACTware

    Tutorial on how to perform configuration and commission of field device using PACTware

    View More
  • Download and Install PACTWare and DTM
    Download and Install PACTWare and DTM

    Learn how to download PACTWare and DTM - you can download it for free on our website

    Learn how to download PACTWare and DTM - you can download it for free on our website

    View More
  • USonic R - How To Check Voltage Tutorial
    USonic R - How To Check Voltage Tutorial

    How to check Voltage on USonic R, Ultrasonic level measurement device. We show the inside of the level measurement converter, the connectors and how to check voltage settings with your multimeter. This will enable you to make sure the level measurement device equipped with ultrasonic sensors is working as intended and you can measure liquid levels, do overflow protection or perform open channel flow measurement with a high standard.

    How to check Voltage on USonic R, Ultrasonic level measurement device. We show the inside of the level measurement converter, the connectors and how to check voltage settings with your multimeter. This will enable you to make sure the level measurement device equipped with ultrasonic sensors is working as intended and you can measure liquid levels, do overflow protection or perform open channel flow measurement with a high standard.

    View More
  • ThePoint How to Calibrate Granular Measurement by Moving the Level
    ThePoint How to Calibrate Granular Measurement by Moving the Level

    Learn how to calibrate ThePoint level switch, when measuring in granular when the level can be moved

    Learn how to calibrate ThePoint level switch, when measuring in granular when the level can be moved

    View More
  • ThePoint How to Calibrate Granular MEasurement if you Cannot Move the Level
    ThePoint How to Calibrate Granular MEasurement if you Cannot Move the Level

    Learn how to calibrate ThePoint level switch, when measuring in granular when the level can not be moved

    Learn how to calibrate ThePoint level switch, when measuring in granular when the level can not be moved

    View More
  • Calibrating Universal IV Level System
    Calibrating Universal IV Level System

    Learn how to calibrate Drexelbrook Universal IV Level System.

    Learn how to calibrate Drexelbrook Universal IV Level System.

    View More
  • Change Modes on ThePoint Level Switch
    Change Modes on ThePoint Level Switch

    Drexelbrook Applications Engineer Sunny Singh explains how to change mode on the popular level switch, ThePoint. This can help securing the optimal result when measuring level or overflow

    Drexelbrook Applications Engineer Sunny Singh explains how to change mode on the popular level switch, ThePoint. This can help securing the optimal result when measuring level or overflow

    View More
  • Termination of GP Cote-Shield Cable
    Termination of GP Cote-Shield Cable

    The video applies to RF/Capacitance devices such as point level switch or continuous level measurement.

    The video applies to RF/Capacitance devices such as point level switch or continuous level measurement.

    View More
  • ThePoint - Mode Selection Procedure
    ThePoint - Mode Selection Procedure

    Learn how to easily change the mode of the Drexelbrook ThePoint level switch.

    Learn how to easily change the mode of the Drexelbrook ThePoint level switch.

    View More
  • Z-Tron - Granular Calibration Procedure
    Z-Tron - Granular Calibration Procedure

    Learn how to perform granular calibration on the Drexelbrook Z-Tron level switch.

    Learn how to perform granular calibration on the Drexelbrook Z-Tron level switch.

    View More